Ceiling fan is a relatively popular household appliance. Fortunately, the process of replacing lamps with new ceiling fans is very easy. With a little operation, you can add new lighting fixtures at the bottom of the fan unit.
Only basic tools and skills are required to install ceiling fans. The following are the operation steps:
The following tools are required for installing the ceiling fan: screwdriver masking tape spare device wiring nut
Step 1: To de-energize the circuit, remove the corresponding fuse or trip the corresponding circuit breaker. In addition, you can also operate the main switch to cut off the main power supply at home.
Step 2: Remove the original lamp from the ceiling. Most lamps are fixed to the ceiling with bolts or screws, and can be disconnected after removing the cover plate.
Step 3: Lower the lamp and disconnect the wire. Mark each wire with masking tape for future identification.
Step 4: Refer to the manufacturer's instructions on wiring color coding and the recommended ceiling fan installation steps. In most families, there are two wires in the circuit and three wires in the lamp. Connect the black wire to the black wire, the white wire to the white wire, and then connect the remaining ground wire (bare wire or green wire) to the metal junction box or other location recommended by the manufacturer. Use the wiring nut for connection and check whether it is secure after connection. When installing the ceiling fan, please follow the manufacturer's instructions, usually connect the black wire to the black wire, the white wire to the white wire, and then connect the bare wire or the green wire to the junction box.